[MOD][Moto G5 Plus] MultiROM v33e [No Kexec Workaround][09-10-17]

Introduction

MultiROM is one-of-a-kind multi-boot mod for Moto G5 Plus. It can boot any Android ROM as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a bootmanager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installersystem, which can be used to ship other Linux-based systems.

Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
* Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting, once they are ported to the Moto X Play
* Boot from USB drive attached via OTG cable


Warning!

It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.

Installation

1. Via MultiROM Manager app (We do not have Official Support, so this is not an option for us yet) 
This is the easiest way to install everything MultiROM needs. Install the app (Not for Moto X Play) and select MultiROM and recovery on the Install/Update card. If the Status card says Kernel: doesn't have kexec-hardboot patch! in red letters, you have to install also patched kernel (If you want to use Kexec) - either select one on the Install/Update card or get some 3rd-party kernel here on XDA. You are chosing kernel for your primary ROM, not any of your (future) secondary ROMs, so select the version accordingly.
Press "Install" on the Install/Update card to start the installation.

2. Manual installation
Firstly, there are videos on youtube. If you want, just search for "MultiROM installation" on youtube and watch those, big thanks to all who made them. There is also an awesome article on Linux Journal.


MultiROM has 3 parts you need to install:

• Modified recovery (mr-twrp-potter-YYYYMMDD.img) - download the IMG file from second post and use fastboot, TWRP or Flashify app to flash it.
• Patched kernel - you can find it in the second post. Download the ZIP file and flash it in recovery. You can use any 3rd-party kernel which include the patch.
• MultiROM (multirom-YYYYMMDD-vXX-potter-signed.zip) - download the ZIP file from second post and flash it in recovery. 

You current rom will not be erased by the installation.
Download links are in the second post.

Adding ROMs

1. Android
Go to recovery, select Advanced -> MultiROM -> Add ROM. Select the ROM's zip file and confirm.

Using USB drive (not tested yet)

During installation, recovery lets you select install location. Plug in the USB drive, wait a while and press "refresh" so that it shows partitions on the USB drive. You just select the location (extX, NTFS and FAT32 partitions are supported) and proceed with the installation.
If you wanna use other than default FAT32 partition, just format it in PC. If you don't know how/don't know where to find out how, you probably should not try installing MultiROM.
If you are installing to NTFS or FAT32 partition, recovery asks you to set image size for all the partitions - this cannot be easilly changed afterward, so choose carefully. FAT32 is limited to maximum of 4095MB per image - it is limitation of the filesystem, I can do nothing about that.
Installation to USB drives takes a bit longer, because the flash drive is (usually) slower and it needs to create the images, so installation of Ubuntu to 4Gb image on my pretty fast USB drive takes about 20 minutes.
Enumerating USB drive can take a while in MultiROM menu, so when you press the "USB" button in MultiROM, wait a while (max. 30-45s) until it searches the USB drive. It does it by itself, no need to press something, just wait.

Updating/changing ROMs

1. Primary ROM (Internal)

• Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
• Go to Advanced -> MultiROM in recovery and do Inject curr. boot sector.

2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:

• Go to Advanced -> MultiROM -> List ROMs and select the ROM you want to update.
• Select "Flash ZIP" and flash ROM's ZIP file.
• In some cases, you might need to flash patched kernel - get coresponding patched kernel version from second post and flashit to the secondary ROM sama way you flashed ROM's ZIP file.

Explanation of recovery menus

Main menu
- Add ROM - add ROM to boot
- List ROMs - list installed ROMs and manage them
- Inject boot.img file - When you download for example kernel, which is distrubuted as whole boot.img (eg. franco kernel), you have to use this option on it, otherwise you would lose MultiROM.
- Inject curr. boot sector - Use this option if MultiROM does not show up on boot, for example after kernel installation.
- Settings - well, settings.

Manage ROM
- Rename, delete - I believe these are obvious
- Flash ZIP (only Android ROMs) - flash ZIP to the ROM, for example gapps
- Add/replace boot.img - replaces boot.img used by this ROM, this is more like developer option.
- Re-patch init - this is available only for ubuntu. Use it when ubuntu cannot find root partition, ie. after apt-get upgrade which changed the init script.

Source code

MultiROM - https://github.com/multirom-dev
Device Tree - https://github.com/Multirom-Lux/andr...otorola_potter

By Gopal Karneedi